Field comparison

Field comparison reads a validated observation report and the planned plot targets, then reports plot-level residuals and unit-level bias. It does not silently correct the LiDAR layer, the vegetation model, or the treatment schedule.

The comparison uses different definitions on purpose:

  • field shrub cover versus the LiDAR mean cover target;

  • field shrub height versus the LiDAR maximum shrub-height target.

Positive cover or height deltas mean the field measurement is above the LiDAR target. Suggested multipliers are review aids. They are not applied automatically.

Sample status

insufficient means fewer than three complete cover/height pairs. provisional means at least three, but fewer than eight complete pairs for either metric. adequate requires at least eight complete pairs for both metrics. These thresholds are evidence-review gates, not statistical confidence claims.

Treatment response remains not_tested until before/after field observations exist. The modelled shrub reduction and annual regrowth are not calibrated by this report.

Command

brushline field compare \
  --observations field-observations-validated.json \
  --plots corridor-plots.geojson \
  --out field-comparison.json

The output contains plot rows, unit summaries, cover and height multipliers, recommendations, warnings, and caveats. It is a review input for the next calibration decision.